MC Eco centrifugal Hot air gas unit heater

Solution for all types of building for:

Technical details

Description Parameters Data sheets References Request a quote

6 models from 21 to 80 kW
Reliable warm air heating solution, compact and esthetic
Can be installed with duct network (air return and/or blowing)
Simple to use and maintain
Pilot wire reduces installation time
Low NOx level
Direct blowing / Increased air flow compared with a fan coil unit of the same power
Remote control by control box (lighting, flame monitoring, temperature regulation)
Centrifugal fan 900 rpm with air return box, assembled to avoid vibrations
4 channel horizontal in weldless tubular exchanger 2 mm aluminized steel
Casing in sheet steel with oven-baked epoxy paint RAL 9010
Delivered with duct outlet frame and return box
On option: double deflection blowing grille, mixing dampers, bracket and filter

Connection to an air diffusion duct | New air compensation

TYPE			MC21 Eco	MC28 Eco	MC35 Eco	MC50 Eco	MC60 Eco	MC80 Eco
Rated heat input		kW	20	27	34	50	60	80
Rated heating capacity		kW	18,5	25	31,5	46,3	55,5	74
Efficiency		%	92,5	92,5	92,5	92,5	92,5	92,5
Minimum rated heating capacity		kW	14,8	20	25,2	37	44,4	59,2
Motor power		kW	0.25	0.37	0.37	0.75	1.1	2 x 0.75
Gas flow rate at 15°C	G20	20 mbar	2.12 m³/h	2.86 m³/h	3.60 m³/h	5.29 m³/h	6.35 m³/h	8.47 m3/h
	G25	25 mbar	2.35 m³/h	3.18 m³/h	4.00 m³/h	5.88 m³/h	7.06 m³/h	9.41 m³/h
	G31	37 mbar	1.56 kg/h	2.11 kg/h	2.66 kg/h	3.91 kg/h	4.69 kg/h	6.25 kg/h
Exhaust diam.		mm	80/125	80/125	80/125	130	130	130
Air inlet diam.		mm	80/125	80/125	80/125	130	130	130
Voltage			230 Volts / 50 Hz - IP42
Electrical power		VA	860	900	920	1350	1700	2400
Mass		kg	99	117	125	165	180	260